Wacker 35mm Vibrator Head H35Wacker 3m Flexshaft SM3SWacker 115V Electric Drive Unit M2500The internal vibrators of this range are individually configurable with different flexible shafts, vibrator heads and engines. All equipment has a quick disconnect coupling for simple and quick handling as well as mobile, easily portable engines.
High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concrete.Integrated quick disconnect couplings on shafts easily connect to all Wacker Neuson motors, offering 62 combinations.Four head bearings lubricated with high temperature resistant synthetic oil, prevent bearing failure due to inadvertent operation of equipment out of concrete.Hardened head housing and tip prolongs head life and increases productivity.
| Description | Data | |
| Diameter | 35 mm | |
| Length | 410 mm | |
| Weight | 2.1 kg | |
| Shipping Weight incl. Packaging | 2.3 kg | |
| Effective Compaction Diameter 1 | 61 cm | |
| 1 Please note: This is a non-binding statement based on the practical experiences of our customers under certain operating conditions. This may vary under special circumstances. We recommend always doing a test run under normal operating conditions. | ||
| Capacity | 9 m3/h | |
| Type of Flexible Shaft | SM-S | |
| Specifications may change due to continuous product development. * Actual power output may vary due to conditions of specific use |
||
High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concreteIntegrated quick disconnect couplings on shafts easily connect to all Wacker Neuson motors, offering 62 combinations.Oil resistant reinforced rubber shafts with steel reinforced coils on the quick disconnect end reduces wear and increases shaft life.
| Description | Data |
| Length | 3 m |
| Weight | 5.9 kg |
| Specifications may change due to continuous product development. * Actual power output may vary due to conditions of specific use |
|
Extremely durable thanks to the sturdy, break-proof high impact plastic housing.Ideal to transport thanks to the compact form, low weight and ergonomic handle.All-around protected against splash water.Meets the highest safety standards.Extremely flexible and at the same time maximum sturdiness.Extremely long service life of the carbon brushes (up to 500 operating hours).Air cleaner replacement takes place from the outside with just one screw.Reduce maintenance intervals The replacement or cleaning of the filter is possible directly on the construction site.Electric motor with 1.8 kW performance and 5.9 kg weight
| Description | Data |
| Vibrations rpm | 12,000 |
| Engine / Motor | Double insulated universal motor |
| Voltage | 120 V |
| Rated Amperage | 15 A |
| Frequency | 50 / 60 hz |
| Power kW | 1.8 |
| Weight kg | 5.4 |
| L x W x H mm | 312 x 154 x 230 |
| Power Cable | 0.5 |
